SV: Re: National AN-299 VCO idea (was: Re: [sdiy] Exponential converter information)

[Ian Fritz]

At 11:56 AM 6/20/05, karl dalen wrote:
> >
> > I haven't tried it yet, since I don't really like the heater approach
> > (where does the heat go, and what does it do?),
>
>I have tried it and didnt like it!
>I like the heater aproach, but prefer the Moog Source method.
>The heat goes to the air,after it heats the trannies, you know that Ian!

:-) But I do remember one list member having trouble because of putting the 
integrator cap too close to the heated chip.  You do have to watch a bit to 
be sure the exhaust doesn't affect anything else.

   Ian