[sdiy] Dual power supply solution? - Kits vs 2600

[tomg]

What you are listining to....It's not a wild demo
there is nothing wrong with your speakers....

It's the idle output of 1 vco... while all that other CV
stuff is going on.... It's just a buzz that doesn't change 
frequency to show power stability.


Regards
Tom


> Just in case someone might actually believe all
> that anal retentive paranoia..That there is something 
> wrong with the way Arp designed the 2600 or
> the way I designed the 3500 series.
> 
> Here's a sample of the Widcat SBM. It has 3 VCO4s
> 3 VCFs, 4 ADSRs, 2 LFOs a bunch of other stuff and
> a onboard RXpro... It is all powered from the same 
> 317/377 supply used for the 3500... 
> 
> I hooked 1 vco to the output. The LFOs to the ADSRs
> and the other 2 VCOs to the ADSRs. I am madly turning
> all cutoff, freq and fine controls as this was recorded.
> Gee Wiz!! What about that? No problem at all!
> The little pop is me bumping the mic stand. I would say 
> kiss my ass....but that would be childish :)
> 
> http://www.ele4music.com/pics/wildcat1.wav
> 
> Tom