[sdiy] Mounting hole size/location for FracRack panels

[jays at aracnet.com]

Jon,

If you are using real PAIA FracRac panels use the mounting hole as your reference points and not the edges. The panels edges are not exact so using those as reference points can give you cock-eyed panels. Using the mounting holes as reference will give you a centered panel.

May you drill bits always be sharp.
Jay S.

Jonathan Lutz wrote:

> I am in the midst of designing a few FracRack-sized panels and am wondering=
> =20
> if there is some sort of spec for size and location of mounting holes? I=20
> fear that if I try to 'measure and guess', I will potentially screw it up=
> =20
> and waste a bunch of money on panel fab. (Better to ask those who have=20
> designed these before!)
> 
> It would be ideal to know the size/location for both single-width and=20
> double-width panels.=20
> 
> Thanks again!
> JON