[sdiy] part info, trades, and auction

[Michael Ruberto]

ok Ebay sucks! after much frustration with trying to setup some auctions I 
realized it was not worth the time and effort. Having worked as a web 
developer I must say that Ebay really needs to hire a usability expert in a 
bad way.

With that said, I have some gear for sale:
1 Fluke 6011A signal generator, good condition and working, with rackmount 
adapters - no manual. Serious offers only. Will consider trading it for an 
O-Scope.

2 Tektronix Scope Calibrators, like new (one has broken knob), both work 
fine, have manual and all adapters. Designed to be used with Tektronix Type 
601, 611, and 613 storage monitors but can be used with any scope using 
front panel outputs.

1 EIP 451 Microwave Pulse Counter, good condition, cannot verify proper 
operation but it powers on - no manual. I realize this isn't of any use to 
SDIYers but maybe you know of someone who works with this type of 
equipment...

7 Shockmount 19" Rack boxes, in fair to good condition, racks hold up to 9U 
of equipment, these are military surplus and designed to withstand an atom 
bomb. SKB wishes they could make a rack box as tough as this. Boxes are 
fiberglass with aluminum frames, environmentally sealed and have pressure 
release valves. Some come with extras including support rails, drawers, and 
power strips.

Please do not send offers to the list. I'll post some better pics of these 
items soon.

M. A. Ruberto

>From: "Michael Ruberto" <frankentron at hotmail.com>
>To: synth-diy at dropmix.xs4all.nl
>Subject: [sdiy] part info,  trades, and auction
>Date: Sat, 11 Jun 2005 15:56:03 -0400
>
>Hello,
>
>I have sorted out the grab bag of parts my former employer sent me and I 
>have found some interesting and odd parts. some may be useful for repair 
>work. anyway I cannot find specs or pinouts for most of these and I would 
>appreciate any pointers toward such info. also, if anything here is useful 
>to you I will trade for other (more recent) parts.
>
>1) Clairex CLM 4006 A Photomod, NOS, 2 pieces (cannot find specs)
>2) 2N5545 Dual matched FET, NOS, 1 Piece (cannot find specs or pinout)
>3) MC1468R Bipolar tracking regulator +/- 15V, TO66, 9 pins, NOS, 1 piece 
>(cannot find specs or pinout)
>4) 300K 0.1% 5ppm resistors, NOS, 5 pieces
>5) 2N4302 FET (used in Oberheim SEM), NOS, 4 pieces (cannot find specs or 
>pinout)
>6) LM709, TO5, NOS, 2 pieces, http://www.national.com/pf/LM/LM709.html
>7) TL074CDR, SOIC, 10 pieces, NEW
>8) TL072CDR, SOIC, 10 pieces NEW
>9) SN74HC393DR, SOIC, 5 pieces, NEW
>10) SN74HC04DR, SOIC, 5 pieces, NEW
>11) 2N3694, NPN, 45V, 50ma, NOS, 5 pieces (cannot find pinout)
>12) 30.1 Ohm, 1%, 75W Dale resistor, 1 piece, used (nice for load testing a 
>15V supply)
>13) 187 Ohm, 1%, 120W Dale resistor, 1 piece, used
>14) 127 Ohm, 1%, 120W Dale resistor, 1 piece, used
>
>I have a feeling this is the wrong crowd for the SOIC parts ;-)
>also, I will be putting the test equipment I recently aquired on Ebay this 
>weekend now that I've tested it out. Here's the link again for pics 
>http://frankentron.freezope.org/741
>The Fluke 6011, Tektronix Calibrator, EIP451 Pulse Counter, and the 7 
>Shockmount racks will be auctioned off. I'll post the link to it when I 
>have it setup...
>
>M.A. Ruberto
>
>