[sdiy] part info, trades, and auction

[Michael Ruberto]

Hello,

I have sorted out the grab bag of parts my former employer sent me and I 
have found some interesting and odd parts. some may be useful for repair 
work. anyway I cannot find specs or pinouts for most of these and I would 
appreciate any pointers toward such info. also, if anything here is useful 
to you I will trade for other (more recent) parts.

1) Clairex CLM 4006 A Photomod, NOS, 2 pieces (cannot find specs)
2) 2N5545 Dual matched FET, NOS, 1 Piece (cannot find specs or pinout)
3) MC1468R Bipolar tracking regulator +/- 15V, TO66, 9 pins, NOS, 1 piece 
(cannot find specs or pinout)
4) 300K 0.1% 5ppm resistors, NOS, 5 pieces
5) 2N4302 FET (used in Oberheim SEM), NOS, 4 pieces (cannot find specs or 
pinout)
6) LM709, TO5, NOS, 2 pieces, http://www.national.com/pf/LM/LM709.html
7) TL074CDR, SOIC, 10 pieces, NEW
8) TL072CDR, SOIC, 10 pieces NEW
9) SN74HC393DR, SOIC, 5 pieces, NEW
10) SN74HC04DR, SOIC, 5 pieces, NEW
11) 2N3694, NPN, 45V, 50ma, NOS, 5 pieces (cannot find pinout)
12) 30.1 Ohm, 1%, 75W Dale resistor, 1 piece, used (nice for load testing a 
15V supply)
13) 187 Ohm, 1%, 120W Dale resistor, 1 piece, used
14) 127 Ohm, 1%, 120W Dale resistor, 1 piece, used

I have a feeling this is the wrong crowd for the SOIC parts ;-)
also, I will be putting the test equipment I recently aquired on Ebay this 
weekend now that I've tested it out. Here's the link again for pics 
http://frankentron.freezope.org/741
The Fluke 6011, Tektronix Calibrator, EIP451 Pulse Counter, and the 7 
Shockmount racks will be auctioned off. I'll post the link to it when I have 
it setup...

M.A. Ruberto