[sdiy] My experience with Synth-DIY

[David Panseri]

Sounds awesome! What sequencer and drum programs are you using?

-Dave

On 6/6/05, Stephen Harrison <msteveharrison at telus.net> wrote:
> Here is my first bit of music to come from my Synth!! Hooray!!!
> 
> http://www3.telus.net/~sh9787/b455-l1n3z.mp3
> 
> The drums are from the computer, bassline is all diy gear (sequenced by
> the computer)
> reverb and EQ on the drums, reverb on the bassline, a bit of compression
> on the mix. the drums are overdriven on purpose. sorry for anyone with a
> keen ear i didn't tune the VCO
> 
> ----------------------------------------------
> 
> A bit about me for anyone who is interested:
> 
> I'm 22, and i've been at this on and off for a little over a year now..
> I used to pursue programming as a hobby, until it became what i do for a
> living. I then needed a new hobby, and I guess I found it. Right now I
> work here: http://www.sanewave.com/
> 
> 
> so far i've built (on proto-board) most of the ASM-1:
> 
> 2 VCAs, 2 LFOs, 2 ADSR, 2 Lag (linear and exponential), the Noise
> generator, and 1 VCO (no second VCO or VCF)
> 
> general support modules (mixers, invert and scale.. that stuff)
> 
> the 'polivoks' filter clone (on proto board)
> 
> VC signal router (my own design, based on MAX303 analog switch)
> 
> PAiA drum tone board (on proto board, the kit is no longer available
> apparently)
> 
> kits:
> 
> 2 PAiA midi2cv
> 2 EFM - VCF8E and VCF12A
> 
> currently working on EFM VCO4E
> 
> anyway i wanted to say that this list has been an awesome resource for me
> 
> thanks synth-diy!
> 
> 
>