[sdiy] tr 606 lithium battery

[Metrophage]

I don't have a 606. My 707 had a compartment for AA batteries to retain
the memory. I just ran the wires to a square of perfboard with a CR2032
coin cell on it. I drilled a hole on a corner of the perf so I could
use one of the PCB screws to fasten it into place. It has worked great
for the past two years, and I have been able to use the AA batteries
for other things - like the DR110.

What is a little different with a TR-606 is that the batteries are not
just for memory, it runs off of the batteries. So you might want to put
a diode between the battery and board to keep it from acting weird, but
it might just be ok.

Good luck, and good evening - 
(bowing crisply)
CJ


--- krisp14u <krisp14u at hotmail.com> wrote:

> hi all been lurking and trying to lern somthing on hear for afew
> mounths now
> but need some help
> So dose anyone  have any in-fo on fiting a lithium battery to a tr606
> to
> keep the memory intact
> any help would i would be most gratfull
> 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com