[sdiy] MG-1 revisited, LM337 issues

[Metrophage]

Nope, I've heard that the case potentials are different. I'm using two
separate heatsinks. Thanks for the advice!

CJ

--- Paul Schreiber <synth1 at airmail.net> wrote:

> Do NOT attach both parts to the same heatsink *unless* you have
> insulation 
> washers.
> 
> Paul S>
> 
> ----- Original Message ----- 
> From: "Metrophage" <c0r3dump23 at yahoo.com>
> To: "Paul Schreiber" <synth1 at airmail.net>
> Sent: Saturday, June 04, 2005 5:03 PM
> Subject: Re: [sdiy] MG-1 revisited, LM337 issues
> 
> 
> > --- Paul Schreiber <synth1 at airmail.net> wrote:
> >
> >> The *pinout is NOT the same* for 337/79xx
> >
> > I know, that's why I made the little perfboard I was describing,
> > instead of just replacing the old regulators on the MG-1 keys PCB.
> > Still, I must have goofed it somehow. The 317 and ersatz 337 and
> their
> > heatsinks are on the scrap of perf, along with the adjustment
> > compnents, on standoffs above the original PCB.
> >
> >
> >
> > __________________________________
> > Discover Yahoo!
> > Find restaurants, movies, travel and more fun for the weekend.
> Check it out!
> > http://discover.yahoo.com/weekend.html
> > 
> 
> 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com