[sdiy] Tool for fitting 3.5mm jack sockets

[Grant Richter]

Mouser 382-0006 for 3.5mm

http://www.mouser.com/index.cfm? 
&handler=data.listcategory&D=*3820006*&terms=382-0006&Ntt=*3820006*&Dk=1 
&Ns=SField&N=0&crc=true

On May 31, 2005, at 6:09 PM, Tom Arnold wrote:

> On Tue, May 31, 2005 at 11:45:03PM +0100, Seb Francis wrote:
>
>> There are 2 slots in the metal ring, so there must be some kind of  
>> tool
>> that fits this, but I have looked everywhere and can't seem to find
>> one.  Any help would be much appreciated :)
>>
>
> I hate these rings with a passion...  there *is* a tool for  
> tightening them,
> its a barrel that just fits around the ring that has two keys  
> inside that
> fit the slots, but barring one of those you can use what I keep  
> around which
> is a cheap pair of needle nose pliers that I filed until the tips  
> fit into
> the slots.
>
> -- 
>  -----------------------------------------------------------------
>  - Tom Arnold       -  Free Synth DIY webspace http://www.sdiy.org
>  - SynthGeek        -
>  - BBD Fanatic      -  "...is it a virus, a drug, or a religion?"
>  - echo evho wjxo   -    Juanita Shrugs. "What's the difference?"
>  --------------------
>