[sdiy] sample and (infinite) hold

[Scott Juskiw]

>maybe you can impliment the S&H as part of the quantizer. If you are 
>converting the CV into digital anyway, you could sampled and hold it 
>in the digital domain, before you DA it again. It won't droop there.

That would work, but unfortunately, the S&H is not part of the 
quantizer (it's part of a ribbon controller), I was just using that 
as an example. If I patch the S&H output directly into a VCO 
frequency input, bypassing the quantizer, the droop is even more 
noticeable as the sequence drifts flatter and flatter. I think I'm 
going to have to bite the bullet and go with the ADC/DAC route. 
Thanks for your help.