[sdiy] stringfilter

[Magnus Danielson]

From: "JH." <jhaible at debitel.net>
Subject: Re: [sdiy] stringfilter
Date: Wed, 16 Feb 2005 00:34:07 +0100
Message-ID: <001301c513b6$d9a32310$0200a8c0 at jhsilent>

> > Would you care to elaborate on which frequencies and Q-values you had?
> 
> Frequencies are the same that Ian and Bernie used (if you have the EN
> article. If you don't, I can look the up.)

I would have check them if I had them and then only asked if you used the same.

I have still not got the ENs you know (and you know why I guess). Maybe one
day.

> Q of the individual filters is 20 if memory servers, but it's changed to
> higher and lower values by positive or negative feedback around the whole
> filter bank. (Again, same as in the old EN articles.) For string sounds, you
> look for a peak/valley ratio of approx. 10dB.
> For other applications, both higher and lower Q makes sense.

OK, that makes sense. Thanks!

Cheers,
Magnus - still a bit soar on the back head, but it is healing