[sdiy] stringfilter

[JH.]

> Would you care to elaborate on which frequencies and Q-values you had?

Frequencies are the same that Ian and Bernie used (if you have the EN
article. If you
don't, I can look the up.)
Q of the individual filters is 20 if memory servers, but it's changed to
higher and lower
values by positive or negative feedback around the whole filter bank.
(Again, same as in the
old EN articles.) For string sounds, you look for a peak/valley ratio of
approx. 10dB.
For other applications, both higher and lower Q makes sense.

JH.