[sdiy] Atmel-based DCOs

[Jaroslaw Ziembicki]

From: "Daniel Kruszyna" <dan at krue.net>
> Here is my take on the AVR dco. Mine's a quad 8-bit dco with 0v to 5v
outputs.


From: Arnaud PONTHET
Here is my contribution to the AVR DCO subject:
http://perso.wanadoo.fr/arno.km/diy/dco.jpg
http://perso.wanadoo.fr/arno.km/diy/dco.asm.txt


From: "Neil Johnson" <neil.johnson97 at ntlworld.com>
> I'll just chip in with my ATMEGA8-based DCO I put together for my Jen
SX1000 restoration.


Hmm... It would be great to build a voice board with a DCO set consisting of
each
of these AVR DCO's. Then add a Moog ladder filter and a second one
(variable-state),
a double VCA for nice stereo panning effects, a BBD chorus/flanger/delay...
The next step would be a set of 32 such boards controlled by a Pentium
processor...

...OK, it's time to go to bed, good night
Jarek