[sdiy] New DIY synth has born

[Thorsten Klose]

Hi Karl,

On Tuesday 15 February 2005 00:50, karl dalen wrote:
> Why the TLC7524? because its industrial standard can deal with minus 
> voltages, are very accurate, can be driven serialy with a eg HC4094.
> Or similar pa to ser.And its the "cheapest" mul dac available, multi source!
> And it will give you a much better solution than a gate function!

thanks a lot for this inspiration! Yes, this would be a perfect "generic"
solution for SID and OPL3 - sounds like a new MBHP module :)

Btw.: do you also have a suggestion for a cheap "common" DAC with
8 or 10 bit solution, which could be taken as a low-cost solution for
CV outputs? Currently I'm using the MAX525 for my "MBHP_AOUT" module,
but this part is hard to get for hobbyists, and very expensive (ca. EUR 25)

Most essential specs would be linearity and glitch-free switching

Best Regards, Thorsten.