[sdiy] ARP 2600 VCO clone

[Rob Keeble]

Hi,
I plan to use these 2N5910's in my ARP VCO clone...from eBay.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=4666&item=3873955696&
rd=1&ssPageName=WDVW

Hope that helps!
Rob
www.emulatorarchive.com


Hi folks,
I am in the process of building an Arp 2600 4027-1 VCO. I used a few
suggestions from a while ago (almos one year, in fact) to replace the
FETs with the 2N4392 and the TZ81/TZ581 transistors with 2N3904/2N3906s.
So far, so good. But I am struggling with the 2N5910: I cannot find a
good substitute, neither find a supplier that carries it. What do I put
in place of the 2N5910? Any ideas?

Thanks in advance!
Luis Marka