[sdiy] Question about earthing on power-one psus

[Cornutt, David K]

From: harrybissell [mailto:harrybissell at prodigy.net]
> Whether you want to tie protective EARTH ground to your 
> circuit is your choice.
> The frame of the power supply should be tied to earth ground, 
> and probably your
> circuit should be tied at some point as well... but perhaps 
> through a resistor and/or
> capacitor.

I don't earth ground the low-voltage side of my modular.
I ground the power supply frame, but that is isolated from
the module faceplates and anything else on the signal side.
So far, no problems.