[sdiy] Where can I get desktop synth enclosures

[Metzger, Michael A]

For DIY case supplies there is a company named TCH   
https://www.tchweb.com
I've seen cases made from their parts and they were NICE! They sell plywood with
different materials laminated onto one surface - aluminum, ABS, etc. Check out
their color chart. Cut the laminate to size, cover the edges with the aluminum
extrusions. The extrusions come in male and female pairs so the two halves of
the case fit together when they close. They also sell all the other hardware you
need to finish a box - various corners, handles, hinges, foam padding, latches,
etc. I've handled some of the DIY boxes and they were rugged. A lot of them
would look great on stage.
Mike


-----Original Message-----
From: owner-synth-diy at dropmix.xs4all.nl
[mailto:owner-synth-diy at dropmix.xs4all.nl]On Behalf Of Vincent L.
Sent: Thursday, February 10, 2005 12:04 AM
To: synth-diy at dropmix.xs4all.nl
Subject: [sdiy] Where can I get desktop synth enclosures


Hi all !

I'm trying to restore a Pro One, that has no Keys and wheels,
I'm looking for a desktop metal enclosure wide enough to contain the Pro-One
panel,
about 24X10 with a slight angle . I made some research on the web...
I've seen Hammond makes some, but not as large as I would need,
(Wooden ends would be a wonderful option too!!!.)

Any tip would be more than welcome!

Thanks once again !

Vincent