[sdiy] if You Make PCB's @ home

[Gorka Garcia]

I have tried it over a surface painted with spray paint but with no success, but I have heard in a guitar effects forum of people using it successfully for that purpose.


--- Yves Usson <yves.usson at imag.fr> wrote:

From: Yves Usson <yves.usson at imag.fr>
Date: Wed, 9 Feb 2005 15:50:32 +0100
To: sdiy <synth-diy at dropmix.xs4all.nl>
Subject: Re: [sdiy] if You Make PCB's @ home

Hi

Did you try this for front panel labelling ?

Le 9 févr. 05, à 11:24, Gorka Garcia a écrit :

> I have used transparency paper in the past with decent results. A 
> friend who is studying arts, uses this method for art purposes and 
> told me that apparently old copiers are the best for this job, since 
> they normally used a lot more tonner than newer ones.
>
>
Yves Usson
email : yves.usson at imag.fr
http://www-timc.imag.fr/Yves.Usson/personnel/SDIY




_____________________________________________________________
www.deMadrid.com , el correo gratuito de Madrid. 25 Mb de espacio.