[sdiy] Omeg pot brackets

[Seb Francis]

in UK I think you can get them from Maplin electronics.

seb


Tom Arnold wrote:

>Anyone know of a source for the Omeg metal pot brackets that normally
>shipped with Oakley kits?
>
>I finally got that TB3031 working.  Had to audit every resistor on the
>board.  Mostly it was just 22ohm resistors where 2k2's should have been.
>Incorrect switches installed, wrong LEDs installed, backwards diodes, and
>the worlds worst soldering job on some of the pot brackets that actually
>managed to get the front panel to +12v.  Was so satisfying to make it work
>however that in the end it was all worthwhile :-)
>
>So I started looking at the TB3030 boards and found that one has brackets
>and one doesnt so thats now on my list of things to aquire as I start the
>build-out of my own dual 3030...
>
>  
>