[sdiy] Pinout for UA776CH?

[Joachim]

Hi Harry,

thanks a lot.

Also to Simon. :-) (Yes, they have 8 legs, forgot to mention that)

Regards,
Joachim


Am 17.12.2005 um 04:46 schrieb harrybissell:

> Looking from the TOP of the metal can... with the tab at 12:00
>
> numbers run counter-clockwise
>
> Pin 8 is the tab
>
> 1 = Offset Null
> 2 = -in
> 3 = +in
> 4 = V-
> 5 = Offset Null
> 6 = out
> 7 = V+
> 8 = Iset
>
> This is the same 'rotation' as the DIP package and you could
> form the leads to fit the can in the DIP outline
>
> H^) harry
>
> Joachim wrote:
>
>> Hi there,
>>
>> I recently buyed some UA776 for my Papareil Polivoks Filters.
>>
>> But as I got them I was a little shocked since they were not
>> DIP-8 as expected but in a kind of "metal can" package or so.
>> Nothing mentioned in the datasheet from SGS-Thomson.
>>
>> But it has definately the SGS-Thomson "ST" logo on it.
>>
>> It's labeled "UA776C" and with a number "99240".
>> IMHO the C only tells about the temperature range.
>>
>> Can anybody help?
>>
>> Thanks in advance.
>>
>> Best regards,
>> Joachim Backhaus
>>
>> PS: Yes! Next time I will previously ask for the package. ;-)
>