[sdiy] Pinout for UA776CH?

[harrybissell]

Looking from the TOP of the metal can... with the tab at 12:00

numbers run counter-clockwise

Pin 8 is the tab

1 = Offset Null
2 = -in
3 = +in
4 = V-
5 = Offset Null
6 = out
7 = V+
8 = Iset

This is the same 'rotation' as the DIP package and you could
form the leads to fit the can in the DIP outline

H^) harry

Joachim wrote:

> Hi there,
>
> I recently buyed some UA776 for my Papareil Polivoks Filters.
>
> But as I got them I was a little shocked since they were not
> DIP-8 as expected but in a kind of "metal can" package or so.
> Nothing mentioned in the datasheet from SGS-Thomson.
>
> But it has definately the SGS-Thomson "ST" logo on it.
>
> It's labeled "UA776C" and with a number "99240".
> IMHO the C only tells about the temperature range.
>
> Can anybody help?
>
> Thanks in advance.
>
> Best regards,
> Joachim Backhaus
>
> PS: Yes! Next time I will previously ask for the package. ;-)