SV: Re: SV: [sdiy] Blackmer cell) EDN crap!!

karl dalen dalenkarl at yahoo.se
Thu Dec 8 22:31:15 CET 2005


Its not the pdf file, i tested it in 3.2 4.0 5.0 6.0.2
all works, its EDN whos at fault!

KD
--- James Patchell <patchell at cox.net> skrev:

> Hmm...that is strange....I was using Mozilla as well...it might have had 
> something to do with the fact that I am using Acrobat 4.0 as well.
> 
> At 10:20 PM 12/6/2005 -0500, jeff brown wrote:
> >I have the same issues with Internet Exploder, having just now tried it. 
> >But I had no problem using good old Mozilla (what I normally use anyway).
> >
> >
> >----- Original Message ----- From: "James Patchell" <patchell at cox.net>
> >To: "karl dalen" <dalenkarl at yahoo.se>; <synth-diy at dropmix.xs4all.nl>
> >Sent: Tuesday, December 06, 2005 4:39 PM
> >Subject: Re: SV: [sdiy] Blackmer cell) EDN crap!!
> >
> >
> >>Can't print...either... :-(
> >>
> >>At 09:35 PM 12/6/2005 +0100, you wrote:
> >>>EDN is completely moronic, i cant right click and
> >>>"save file to" it changes it to "save html"!!! :(
> >>>
> >>>KD (now a grumpy old maggot).
> >>>
> >>>--- Aaron Lanterman <lanterma at ece.gatech.edu> skrev:
> >>>
> >>> >
> >>> > On Mon, 5 Dec 2005, JH. wrote:
> >>> >
> >>> > > It's a Blackmer cell. No offset to speak of (compared to OTAs),
> >>> > > but needs a servo configuration which probably limits its speed.
> >>> >
> >>> > I hadn't encountered the term "Blackmer cell" previously.
> >>> >
> >>> > In playing with VCA designs, is it worth experimenting with 
> >>> building > some
> >>> > discrete Blackmer cells?
> >>> >
> >>> > See http://www.edn.com/article/CA236413.html, Figure 3...
> >>> >
> >>> > http://www.edn.com/contents/images/236413.pdf
> >>> >
> >>> > - Aaron
> >>> >
> >>> >
>
>>>-----------------------------------------------------------------------------
> >>> >
> >>> > Dr. Aaron Lanterman, Asst. Prof.       Voice:  404-385-2548
> >>> > School of Electrical and Comp. Eng.    Fax:    404-894-8363
> >>> > Georgia Institute of Technology        E-mail: lanterma at ece.gatech.edu
> >>> > Mail Code
> >>>0250                         Web:    users.ece.gatech.edu/~lanterma
> >>> > Atlanta, GA 30332                      Office: GCATT 334B
> >>> >
> >>> >
> >>
> >>         -Jim
> >>***************************************************************
> >>http://www.oldcrows.net/~patchell
> >>
> >>***************************************************************
> >>
> >
> 
>          -Jim
> ***************************************************************
> http://www.oldcrows.net/~patchell
> 
> ***************************************************************
> 
> 
> 




More information about the Synth-diy mailing list