[sdiy] Buying the full version of Eagle

[Gergo.Palatinszky at nokia.com]

Hali!

I'm using TARGET 3000(3001) PCB-Pool edition...

It's free, it has very good interoperability with Eagle!!! (so you can
use free Eagle version and transfer most of the things to Target)

Contra: You cannot print in 100% scale  (but you can export .tiff image
with 100% scale with defined resolution and you can print out with any
graphical sw. ;o))))

Udv
	Pala

>-----Original Message-----
>From: owner-synth-diy at dropmix.xs4all.nl 
>[mailto:owner-synth-diy at dropmix.xs4all.nl] On Behalf Of ext Jeff Farr
>Sent: 2005. december 7. 17:46
>To: Synth DIY
>Subject: [sdiy] Buying the full version of Eagle
>
>I'm about to take the dive and drop 399$ of the unrestricted 
>version of the layout editor and before I do this I'm 
>wondering if I should consider any other options..  From what 
>I've found Eagle really is the least expensive option and does 
>everything I'll need, but are there any hidden caveats?  I 
>assume I can still use the free schematic editor with the full 
>layout editor..
>
>