SV: [sdiy] Blackmer cell) EDN crap!!
James Patchell
patchell at cox.net
Wed Dec 7 06:52:23 CET 2005
Hmm...that is strange....I was using Mozilla as well...it might have had
something to do with the fact that I am using Acrobat 4.0 as well.
At 10:20 PM 12/6/2005 -0500, jeff brown wrote:
>I have the same issues with Internet Exploder, having just now tried it.
>But I had no problem using good old Mozilla (what I normally use anyway).
>
>
>----- Original Message ----- From: "James Patchell" <patchell at cox.net>
>To: "karl dalen" <dalenkarl at yahoo.se>; <synth-diy at dropmix.xs4all.nl>
>Sent: Tuesday, December 06, 2005 4:39 PM
>Subject: Re: SV: [sdiy] Blackmer cell) EDN crap!!
>
>
>>Can't print...either... :-(
>>
>>At 09:35 PM 12/6/2005 +0100, you wrote:
>>>EDN is completely moronic, i cant right click and
>>>"save file to" it changes it to "save html"!!! :(
>>>
>>>KD (now a grumpy old maggot).
>>>
>>>--- Aaron Lanterman <lanterma at ece.gatech.edu> skrev:
>>>
>>> >
>>> > On Mon, 5 Dec 2005, JH. wrote:
>>> >
>>> > > It's a Blackmer cell. No offset to speak of (compared to OTAs),
>>> > > but needs a servo configuration which probably limits its speed.
>>> >
>>> > I hadn't encountered the term "Blackmer cell" previously.
>>> >
>>> > In playing with VCA designs, is it worth experimenting with
>>> building > some
>>> > discrete Blackmer cells?
>>> >
>>> > See http://www.edn.com/article/CA236413.html, Figure 3...
>>> >
>>> > http://www.edn.com/contents/images/236413.pdf
>>> >
>>> > - Aaron
>>> >
>>> >
>>>-----------------------------------------------------------------------------
>>> >
>>> > Dr. Aaron Lanterman, Asst. Prof. Voice: 404-385-2548
>>> > School of Electrical and Comp. Eng. Fax: 404-894-8363
>>> > Georgia Institute of Technology E-mail: lanterma at ece.gatech.edu
>>> > Mail Code
>>>0250 Web: users.ece.gatech.edu/~lanterma
>>> > Atlanta, GA 30332 Office: GCATT 334B
>>> >
>>> >
>>
>> -Jim
>>***************************************************************
>>http://www.oldcrows.net/~patchell
>>
>>***************************************************************
>>
>
-Jim
***************************************************************
http://www.oldcrows.net/~patchell
***************************************************************
More information about the Synth-diy
mailing list