SV: [sdiy] Blackmer cell) EDN crap!!

[jeff brown]

I have the same issues with Internet Exploder, having just now tried it. But 
I had no problem using good old Mozilla (what I normally use anyway).


----- Original Message ----- 
From: "James Patchell" <patchell at cox.net>
To: "karl dalen" <dalenkarl at yahoo.se>; <synth-diy at dropmix.xs4all.nl>
Sent: Tuesday, December 06, 2005 4:39 PM
Subject: Re: SV: [sdiy] Blackmer cell) EDN crap!!


> Can't print...either... :-(
>
> At 09:35 PM 12/6/2005 +0100, you wrote:
>>EDN is completely moronic, i cant right click and
>>"save file to" it changes it to "save html"!!! :(
>>
>>KD (now a grumpy old maggot).
>>
>>--- Aaron Lanterman <lanterma at ece.gatech.edu> skrev:
>>
>> >
>> > On Mon, 5 Dec 2005, JH. wrote:
>> >
>> > > It's a Blackmer cell. No offset to speak of (compared to OTAs),
>> > > but needs a servo configuration which probably limits its speed.
>> >
>> > I hadn't encountered the term "Blackmer cell" previously.
>> >
>> > In playing with VCA designs, is it worth experimenting with building 
>> > some
>> > discrete Blackmer cells?
>> >
>> > See http://www.edn.com/article/CA236413.html, Figure 3...
>> >
>> > http://www.edn.com/contents/images/236413.pdf
>> >
>> > - Aaron
>> >
>> >
>> -----------------------------------------------------------------------------
>> >
>> > Dr. Aaron Lanterman, Asst. Prof.       Voice:  404-385-2548
>> > School of Electrical and Comp. Eng.    Fax:    404-894-8363
>> > Georgia Institute of Technology        E-mail: lanterma at ece.gatech.edu
>> > Mail Code
>> 0250                         Web:    users.ece.gatech.edu/~lanterma
>> > Atlanta, GA 30332                      Office: GCATT 334B
>> >
>> >
>
>         -Jim
> ***************************************************************
> http://www.oldcrows.net/~patchell
>
> ***************************************************************
>
>