SV: [sdiy] Blackmer cell) EDN crap!!

[James Patchell]

Can't print...either... :-(

At 09:35 PM 12/6/2005 +0100, you wrote:
>EDN is completely moronic, i cant right click and
>"save file to" it changes it to "save html"!!! :(
>
>KD (now a grumpy old maggot).
>
>--- Aaron Lanterman <lanterma at ece.gatech.edu> skrev:
>
> >
> > On Mon, 5 Dec 2005, JH. wrote:
> >
> > > It's a Blackmer cell. No offset to speak of (compared to OTAs),
> > > but needs a servo configuration which probably limits its speed.
> >
> > I hadn't encountered the term "Blackmer cell" previously.
> >
> > In playing with VCA designs, is it worth experimenting with building some
> > discrete Blackmer cells?
> >
> > See http://www.edn.com/article/CA236413.html, Figure 3...
> >
> > http://www.edn.com/contents/images/236413.pdf
> >
> > - Aaron
> >
> > 
> -----------------------------------------------------------------------------
> >
> > Dr. Aaron Lanterman, Asst. Prof.       Voice:  404-385-2548
> > School of Electrical and Comp. Eng.    Fax:    404-894-8363
> > Georgia Institute of Technology        E-mail: lanterma at ece.gatech.edu
> > Mail Code 
> 0250                         Web:    users.ece.gatech.edu/~lanterma
> > Atlanta, GA 30332                      Office: GCATT 334B
> >
> >

         -Jim
***************************************************************
http://www.oldcrows.net/~patchell

***************************************************************