[sdiy] Jomox Xbase Potmeter repair?

[Peter]

Hey,

Does anyone know what kind of potentiometers were used on the Jomox Xbase09?
The Bassdrum Volume Pot on one is broken....is it easy replaceable?
And what type is it?

Thanks in advance,


Peter Blanckaert


-----Oorspronkelijk bericht-----
Van: owner-synth-diy at dropmix.xs4all.nl
[mailto:owner-synth-diy at dropmix.xs4all.nl] Namens Seb Francis
Verzonden: dinsdag 6 december 2005 13:04
Aan: Bart Provoost
CC: synth-diy at dropmix.xs4all.nl
Onderwerp: Re: [sdiy] Nifty tool from Jameco

Temperature controlled soldering iron ...
Crimp tool for PCB header pins ...

Bart Provoost wrote:

> Ok, maybe this thread can be completed with other tools like this?
>  
>
>    1. Jameco part 99362CP, IC pin straightener
>    2. Jameco p/n 106884... 1/4 and 1/2 wtt lead forming tool
>    3. heat gun (for heat shrink tubes)
>    4. ...
>
> The holidays are coming, I need to make wishlists for the family ;)
>  
>  
> Bart
> -- 
> http://filters.muziq.be
>
>
>  
> On 12/6/05, *Seb Francis* <seb at burnit.co.uk <mailto:seb at burnit.co.uk>> 
> wrote:
>
>     cigarette lighter works pretty well too .. but for doing lots of
>     shrinking you can't beat the real thing :)
>
>     mcb, inc. wrote:
>
>     > On Mon, 5 Dec 2005, Tom Arnold wrote:
>     >
>     >> This tool is right up there with, well, Jameco p/n 106884...
>     1/4 and 1/2
>     >> watt lead forming tool.
>     >
>     >
>     > Add heat gun to the list.  I've gotten by with soldering iron
>     shrinking
>     > of heat shrink tubing.  Making cables, I finally broke down and
>     bought
>     > one and the quality of the shrink was *sooooo* much better I
>     went back
>     > and reshrunk everything I could find.
>     >
>     > m
>     >
>     > --
>     > Monty Brandenberg
>     >
>     >
>
>
>