[sdiy] Nifty tool from Jameco

[Seb Francis]

Small (sprung) edge cutters ...
Oscilloscope .. :)

Bart Provoost wrote:

> Ok, maybe this thread can be completed with other tools like this?
>  
>
>    1. Jameco part 99362CP, IC pin straightener
>    2. Jameco p/n 106884... 1/4 and 1/2 wtt lead forming tool
>    3. heat gun (for heat shrink tubes)
>    4. ...
>
> The holidays are coming, I need to make wishlists for the family ;)
>  
>  
> Bart
> -- 
> http://filters.muziq.be
>
>
>  
> On 12/6/05, *Seb Francis* <seb at burnit.co.uk <mailto:seb at burnit.co.uk>> 
> wrote:
>
>     cigarette lighter works pretty well too .. but for doing lots of
>     shrinking you can't beat the real thing :)
>
>     mcb, inc. wrote:
>
>     > On Mon, 5 Dec 2005, Tom Arnold wrote:
>     >
>     >> This tool is right up there with, well, Jameco p/n 106884...
>     1/4 and 1/2
>     >> watt lead forming tool.
>     >
>     >
>     > Add heat gun to the list.  I've gotten by with soldering iron
>     shrinking
>     > of heat shrink tubing.  Making cables, I finally broke down and
>     bought
>     > one and the quality of the shrink was *sooooo* much better I
>     went back
>     > and reshrunk everything I could find.
>     >
>     > m
>     >
>     > --
>     > Monty Brandenberg
>     >
>     >
>
>
>