[sdiy] Nifty tool from Jameco

[Bart Provoost]

Ok, maybe this thread can be completed with other tools like this?


   1. Jameco part 99362CP, IC pin straightener
   2. Jameco p/n 106884... 1/4 and 1/2 wtt lead forming tool
   3. heat gun (for heat shrink tubes)
   4. ...

The holidays are coming, I need to make wishlists for the family ;)


Bart
--
http://filters.muziq.be



On 12/6/05, Seb Francis <seb at burnit.co.uk> wrote:
>
> cigarette lighter works pretty well too .. but for doing lots of
> shrinking you can't beat the real thing :)
>
> mcb, inc. wrote:
>
> > On Mon, 5 Dec 2005, Tom Arnold wrote:
> >
> >> This tool is right up there with, well, Jameco p/n 106884... 1/4 and
> 1/2
> >> watt lead forming tool.
> >
> >
> > Add heat gun to the list.  I've gotten by with soldering iron shrinking
> > of heat shrink tubing.  Making cables, I finally broke down and bought
> > one and the quality of the shrink was *sooooo* much better I went back
> > and reshrunk everything I could find.
> >
> > m
> >
> > --
> > Monty Brandenberg
> >
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20051206/5e5ca43c/attachment.htm>