Bypass caps (was:Re: [sdiy] Silly question about dual vs. quad op amps

[harrybissell]

but... that's why MY designs sound so different from
everyone else's...   :^P

(be sure to use a NP0 cap, btw...)

H^) harry

Samppa Tolvanen wrote:

> On 12/5/05, Harry Bissell Jr <harrybissell at prodigy.net> wrote:
> > I use .1uF caps for decoupling, one per IC pin.
> >  I would use more if the current draw of slew rate was
> >  very high, usually not an issue with TL07x series.
> >
> >  I do not share decoupling caps between duals.
> >  I run power supply traces to the capaciotr pins, then
> >  to the IC.  Sharing with two duals will probably mean that
> >  the ICs are too dar from the cap to be effective.
> >
>
> Lets try: 100nf  per each pin? 8 times per dual and 14 for quad?
> Strange shit, man :D
>
> S