Bypass caps (was:Re: [sdiy] Silly question about dual vs. quad op amps

[Samppa Tolvanen]

On 12/5/05, Harry Bissell Jr <harrybissell at prodigy.net> wrote:
> I use .1uF caps for decoupling, one per IC pin.
>  I would use more if the current draw of slew rate was
>  very high, usually not an issue with TL07x series.
>
>  I do not share decoupling caps between duals.
>  I run power supply traces to the capaciotr pins, then
>  to the IC.  Sharing with two duals will probably mean that
>  the ICs are too dar from the cap to be effective.
>

Lets try: 100nf  per each pin? 8 times per dual and 14 for quad?
Strange shit, man :D

S