[sdiy] Plasmacam

[John L Marshall]

Flow International Corporation, Kent, Washington

http://www.flowcorp.com 

Take care,
John

www.sound-photo.com
47-30-39.02 N, 122-09-51.75 W, elev 440'
----- Original Message ----- 
From: "Tom Arnold" <xyzzy at sysabend.org>
To: "Jess Balint" <jbalint at gmail.com>
Cc: "SynthDIY" <synth-diy at dropmix.xs4all.nl>
Sent: Monday, August 29, 2005 12:33 AM
Subject: Re: [sdiy] Plasmacam


> On Sun, Aug 28, 2005 at 11:15:25PM -0400, Jess Balint wrote:
>> I know somebody who is going to be buying a plasmacam setup
>> (www.plasmacam.com) for his own business. has anybody ever used one of
>> these? I am interested to know what type of files the software uses
>> and if it would be viable to make some front panels on it. Thanks.
> 
> I've played with handheld plasma cutters and they dont quite have the
> precision required to make the smaller holes for panels ( like LEDs ).
> 
> If anyone runs across the guy who made a Flowjet using hypodermic needles
> however...  He was cutting 1/8" 6061 aluminum with better then .1mm
> accuracy.
> 
> -- 
> -----------------------------------------------------------------
> - Tom Arnold       -  Free Synth DIY webspace http://www.sdiy.org 
> - SynthGeek        -
> - BBD Fanatic      -  "...is it a virus, a drug, or a religion?" 
> - echo evho wjxo   -    Juanita Shrugs. "What's the difference?" 
> --------------------  
>