[sdiy] Wanred (dead or alive) : Pot

[harrybissell]

I'm thinking typical cast aluminum stompbox... those get pretty
thick.  Nice to mount the circuit board right off the pots if
possible...
cheap and no ugly machining

H^) harry

Paul Perry wrote:

> These Alps pots can come with no bush, or
> with (measuring it...) what appears to be a tad over 5mm.
> Unless you are using battleship plates it should be OK.
> Certainly no trouble on 2.4 mm steel, I know.
>
> paul perry melb aust
>
> ----- Original Message -----
> From: "Harry Bissell Jr"
> > I don't know... but the ones I saw were usually
> > PCB mount 12mm square with plastic shafts...
> > you can get panel mount bushings but they look to
> > fit in REAL thin panels.
> >