[sdiy] Front Panel Express Template question

[Michael Ruberto]

So Roman, that explains why the knobs on your panels veer off at an odd 
angle as you look from top to bottom. I thought it was artistic flare! ;-)

M. A. Ruberto

>From: "Roman" <modular at go2.pl>
>To: <synth-diy at dropmix.xs4all.nl>
>Subject: Re: [sdiy] Front Panel Express Template question
>Date: Mon, 8 Aug 2005 23:24:27 +0200
>
>Very good lubricant for drilling all types of aluminium I drilled
>so far is pure alcohol (everclear). And it's fun to use too
>as you can have a drink every now and then ;)
>Nice and shiney finish with stepper drill, or plain drill bit.
>Drill press is what you like to use for it.
>I've also had good results, especially while cutting threads, with
>machine oil.
>
>Roman
>
>----- Original Message -----
>From: "Mikael Mørup" <Mikael at mikmo.dk>
>To: <synth-diy at dropmix.xs4all.nl>
>Cc: <@webmail.surf-town.net>
>Sent: Monday, August 08, 2005 7:46 PM
>Subject: RE: [sdiy] Front Panel Express Template question
>
><snip>
>
> > Could you recommend a brand of lubricate, because i just
> > bought a step dril ( the guy in the shop didn't know what
> > it was until i explained, and he said ohh you mean a
> > christmas tree drill, true story :-)  ) And i am having
> > problems with little pieces of AL sticking to "the sharp
> > edge" of the drill, which leaves me with a mess in stead of
> > nice deburred holes.
> >
> > Mikael
> >
> >
>