[sdiy] Front Panel Express Template question

[Roman]

Very good lubricant for drilling all types of aluminium I drilled
so far is pure alcohol (everclear). And it's fun to use too
as you can have a drink every now and then ;)
Nice and shiney finish with stepper drill, or plain drill bit.
Drill press is what you like to use for it.
I've also had good results, especially while cutting threads, with
machine oil.

Roman

----- Original Message -----
From: "Mikael Mørup" <Mikael at mikmo.dk>
To: <synth-diy at dropmix.xs4all.nl>
Cc: <@webmail.surf-town.net>
Sent: Monday, August 08, 2005 7:46 PM
Subject: RE: [sdiy] Front Panel Express Template question

<snip>

> Could you recommend a brand of lubricate, because i just
> bought a step dril ( the guy in the shop didn't know what
> it was until i explained, and he said ohh you mean a
> christmas tree drill, true story :-)  ) And i am having
> problems with little pieces of AL sticking to "the sharp
> edge" of the drill, which leaves me with a mess in stead of
> nice deburred holes.
>
> Mikael
>
>