[sdiy] Oberheim Matrix6r Problem

[harrybissell]

Look at the output of each individual voice (there is a jumper from
each voice to the common output section.

I'd check the analog switch that handles the stereo / split option.

But check check check the settings VERY carefully. Mine was
hosed in program settings.

Try a global reset. I forget how... I think you hold down the enter key and
switch the power on.  Correct me if I'm wrong, someone...

H^) harry

Carbon111 wrote:

> Hi Folks,
> Anybody ever come across one with an entirely dead right channel. Its
> not the output jack, the headphone jack shows the same behavior. Checked
> the "stereo" setting in the Master section - all is well. The "upper"
> channel in every split is silent also - I'm assuming this is the same
> problem. Any suggestions on where to start to look.
> Very Best Regards, James
> --
> http://www.carbon111.com