Re: [sdiy] Very small PCB fab

[Roman]

it should be possible to order small PCBs in any PCB fab. Even as small as 1206 resistor. They just cut the PCB on both sides leaving thin part of the epoxy, so entire big PCB is in one piece, but you can rip the pieces out easily by bending.
If you don't find any fab near you, I could recommend a good cheap fab in Poland

Roman

---- Wiadomość Oryginalna ----
Od: Tom Arnold <xyzzy at sysabend.org>
Do: synth-diy at dropmix.xs4all.nl
Data: Tue, 2 Aug 2005 12:59:40 -0700
Temat: [sdiy] Very small PCB fab

> Anyone recommend a PCB fab that will do extremely small PCBs?  I'm thinking
> something about the size of, well, a DIP8.  This is smaller then I've found
> sofar.  If not, it'll be easy enough to get long/narrow boards and cut them
> but I'm looking for the easy way out...
> 
> -- 
>  -----------------------------------------------------------------
>  - Tom Arnold       -  Free Synth DIY webspace <a href="http://www.sdiy.org" target='_blank'>http://www.sdiy.org</a> 
>  - SynthGeek        -
>  - BBD Fanatic      -  "...is it a virus, a drug, or a religion?" 
>  - echo evho wjxo   -    Juanita Shrugs. "What's the difference?" 
>  --------------------  
> 
>