I wasn't referring to the Vactrols as strange or exotic, I was asking for
OTHER simple LPF designs without SSMs or CEMs. Basically a LPF (not LPG)
design I can make with parts that cost $3. : )
Thanks for the tip!
"Paul Schreiber"
<synth1 at airmail.net> To: <synth-diy at dropmix.xs4all.nl>,
<Rafael_Cohen at prusec.com>
Sent by: cc:
owner-synth-diy at dropmix.xs4all.nl Subject: Re: [sdiy] Vactrols
Tuesday April 26, 2005 05:41 PM
Please respond to "Paul Schreiber"
These are not "strange or exotic", get them for like $3ea from Allied
Electronics web site.
Paul S.
----- Original Message -----
From: <Rafael_Cohen at prusec.com>
To: <synth-diy at dropmix.xs4all.nl>
Sent: Tuesday, April 26, 2005 4:20 PM
Subject: [sdiy] Vactrols
>
>
> I am thinking of putting together the Low Pass Gates I found the
schematic
> for on Peter Grenader's website and I was wondering where to buy
Vactrols.
>
> The ones he uses are: VTL5C3 VTL5C3/2
> Also curious if anyone has a schematic they recommend for a basic Low
Pass
> Filter w/o any terribly exotic chips.
>
> I'm pretty new to this stuff, but getting in deeper every day.
> Thanks,
> Rafael
>