[sdiy] moog module designs

[Tim Daugard]

Okay after thinking about it and looking at the moog 923 schematic, I
have put together a whiteboard on the difference between current mode
and voltage mode output signals.

http://home.sprintmail.com/~daugard/images/I_Vs_V.gi

The one thing I left out was that voltage mode signals can be AC
coupled. Current mode signals must be patched with a DC capable cable.
When an AC type signal shift is required, the signal must first be
converted from a current to a voltage.

>  http://home.sprintmail.com/~daugard/DCP_21.pdf

The input to the circuit in the PDF - R2 (and R1 - but the circuit could
be built without R1)  the current to voltage converter.

Tim - who's wife just got home again so time to go - nothing further
before tommorow (20 hours from now) - Daugard

AG4GZ 30.4078N 86.6227W Alt: 3.7 M
http://home.sprintmail.com/~daugard/synth.htm