[sdiy] LCD question

[Bob Weigel]

There's a company 'telix' I think in LA area that deals with backlights. 
-Bob

Harry Bissell Jr wrote:

>In the one backlight failure I had... it turned out to
>be an LED backlight so I was able to repair with SMT
>parts...
>
>that NOT being your case... I would try an replace the
>backlight or display.  If not, there is a company
>called Lumitex that makes fiber-optic backlight
>panels.
>
>They are mostly OEM but maybe you could get a sample
>and adapt ???  You'd add your own light source like
>incandescent, or high brightness LED...
>
>H^) harry
>
>
>--- Gene Stopp <gene at ixiacom.com> wrote:
>  
>
>>Hi DIY Folks,
>>
>>OT but a good bunch of knowledge here...
>>
>>I think I've seen discussions before about LCD's
>>with failed backlight, but
>>only now that I need to know do I pay attention :)
>>
>>Got a Digital Music MX-8 patch bay with a failed
>>backlight. It shorts out
>>the HV circuit. When I disconnect the backlight, the
>>HV circuit comes back
>>up to 120-130 VAC. I hate to toss the whole unit
>>out. I can see the
>>characters are there if I shine a light into it.
>>
>>Are LCD's available somewhere, like Digikey or
>>Newark? First Google search
>>does not help much. I'll do more searching, but in
>>the mean time a parallel
>>fish for info. Part number Seiko KS-92. Direct
>>replacement? Get a similar
>>one and swap out the backlight?
>>
>>
>>- Gene
>>
>>
>>
>>
>>    
>>
>
>
>  
>