[sdiy] LCD question

[Harry Bissell Jr]

In the one backlight failure I had... it turned out to
be an LED backlight so I was able to repair with SMT
parts...

that NOT being your case... I would try an replace the
backlight or display.  If not, there is a company
called Lumitex that makes fiber-optic backlight
panels.

They are mostly OEM but maybe you could get a sample
and adapt ???  You'd add your own light source like
incandescent, or high brightness LED...

H^) harry


--- Gene Stopp <gene at ixiacom.com> wrote:
> Hi DIY Folks,
> 
> OT but a good bunch of knowledge here...
> 
> I think I've seen discussions before about LCD's
> with failed backlight, but
> only now that I need to know do I pay attention :)
> 
> Got a Digital Music MX-8 patch bay with a failed
> backlight. It shorts out
> the HV circuit. When I disconnect the backlight, the
> HV circuit comes back
> up to 120-130 VAC. I hate to toss the whole unit
> out. I can see the
> characters are there if I shine a light into it.
> 
> Are LCD's available somewhere, like Digikey or
> Newark? First Google search
> does not help much. I'll do more searching, but in
> the mean time a parallel
> fish for info. Part number Seiko KS-92. Direct
> replacement? Get a similar
> one and swap out the backlight?
> 
> 
> - Gene
> 
> 
> 
>