[sdiy] Re: [AH] Possible availability of more CEM parts/uA726 s

Tim Parkhurst tparkhurst at siliconbandwidth.com
Wed Apr 13 19:39:48 CEST 2005


Hmmm... a 'Mil Spec' MiniMoog...

Probably only cost $150k ($30k parts, $120k in paperwork).

Let's see if we can get a gov't grant to build a bunch. Then again, with the
mil spec components the tuning would be more stable and people would
complain they weren't "phat" enough.


Tim (seen grants for goofier things) Servo

*****************
-----Original Message-----
From: Harry Bissell Jr [mailto:harrybissell at prodigy.net] 
Sent: Wednesday, April 13, 2005 7:25 AM
To: Jay; enmach at aol.com; synth1 at airmail.net
Cc: Analogue Heaven; S-DIY
Subject: Re: [sdiy] Re: [AH] Possible availability of more CEM parts/uA726s

That's probably why there are no MiniMoogs used
on the space shuttle...

H^) harry

--- Jay <synthbaron at tampabay.rr.com> wrote:
> on 4/12/05 8:58 AM, enmach at aol.com at enmach at aol.com
> wrote:
> 
> > FWIW, IIRC, Fred's stock is uA726C - 'commercial',
> as opposed to 'M' -
> > 'military spec'.
> 
> "Commercial" grade was apparently good enough for
> Moog.
> 
> 

-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.8 - Release Date: 4/13/2005
 

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.8 - Release Date: 4/13/2005
 



***************************************************************************
This message is confidential.  The information contained in
this e-mail message is intended only for confidential use of the
recipient(s) named above. If the reader of this message is not the intended
recipient or an agent responsible for delivering it to the intended
recipient, you are hereby notified that you have received this document in
error and that any review, dissemination, distribution, or copying of this
message is strictly prohibited.  If you have received this communication in
error, please notify us immediately by e-mail, and delete the original
message.
***************************************************************************





More information about the Synth-diy mailing list