[sdiy] restoring an sh1000

[Steve Woodward]

Hello there

I took some pictures of the inside of my SH1000 when I installed the  
Kenton CV/gate kit - hope these help...

http://www.swoodward.f2s.com/sh1000/

It's a 220v model (well, UK voltage anyway). The pictures are  
post-modification, but there's not much changed. If there's any confusion  
I can let you know what's additional. I'm not much of a diyer (fitting the  
kit was stretching it...) so I can't really help with any technical stuff,  
but I can always take more photos.

cheers
Steve


On Tue, 12 Apr 2005 11:08:57 +1000, Brett Maddaford  
<Brett.Maddaford at au.perform-sol.com> wrote:

  Unfortunately when it was damaged the transformer
> ripped loose inside and i cant see where to mount it is the first thing  
> also it damaged wires connected to the fuse at the rear (round plastic  
> thingy with solder tabs) so there are some free wires floating around.  
> Apart form that the two 4 pin connectors that run from the pcb under the  
> front panel to the right side of the pcb in the bottom of the case have  
> come off and im not sure which one connects where. if anyone has any  
> idea of which one goes where and where the transformer should be mounted  
> and what wires connect where to the fuse id be really appreciative if  
> you could let me know or if you have a wiring diagram forward it on or  
> let me know where i can look at it. The other thing i noticed is the  
> transformer seems to be wired into the copper coils....is this normal?  
> or has it maybe been modified? ThanksBrett