[sdiy] Re: [AH] Possible availability of more CEM parts/uA726s
Doug Terrebonne
dougt55 at yahoo.com
Tue Apr 12 07:49:11 CEST 2005
Or even less... Someone named "motm-dude" just got some from him for
$13/ea -
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7312617227
There was also someone else trying to sell 16 them for $14/ea and the
auciton ended without any bids... So I would say demand ain't too
high...
--- Doug Terrebonne <dougt55 at yahoo.com> wrote:
> Chipsforbrains has been selling them on ebay for a quite a while for
> $19...
>
> --- Paul Schreiber <synth1 at airmail.net> wrote:
> > I have been offered some additional NOS CEM3372s (which I'm sure I
> > can sell) and
> > some CEM3394s.
> >
> > I haven't had any CEM3394s for years, and I don't know what the
> > demand is.
> >
> > So, if I offer these they will be $30ea but in order to make it
> > worthwhile, I
> > have to sell at least 30 of them.
> >
> > Now, 7 years ago I did this same request and the result is Internet
> > legend (I
> > got over 2300 emails for people saying they would buy CEM chips if
> I
> > offered
> > them, and sold exactly 11 chips the first month. It took me almost
> 4
> > *years* to
> > BREAK EVEN).
> >
> > Being gullible, here I go again: if you REALLY PROMISE to buy at
> > least 1 CEM3394
> > within 2 months, send an email to THIS address:
> >
> > syntht at yahoo.com
> >
> > with your quantity. You WILL be "spammed" by me when I get them
> (will
> > take about
> > 2 weeks). That gives you time to get a money order or set up
> PayPal.
> >
> > Again, this is only for the CEM3394s (not the 3372s, they sell OK).
> I
> > do not
> > want to be stuck with these 3 years to break even.
> >
> > Lastly, I've been offered 2 lots of 25ea uA726H (metal cans)
> > Fairchild NOS.
> > These are HARD to find and $$$. Well, again I can offer these for
> > $75ea but I
> > have to sell 1 lot to break even. So, if you want these for your
> > MiniMoog,
> > System 700 VCOs or other "crank up the heat" synth, drop me a line.
> >
> > But ONLY IF YOU WILL COMMIT.
> >
> > Paul S.
> >
> >
>
More information about the Synth-diy
mailing list