[sdiy] restoring an sh1000

[Brett Maddaford]

Hi All
 
I picked up a damaged sh1000 a while ago for really good price and by
luck the other day got a new timber case for it so cosmetically its
looking good. Unfortunately when it was damaged the transformer ripped
loose inside and i cant see where to mount it is the first thing also it
damaged wires connected to the fuse at the rear (round plastic thingy
with solder tabs) so there are some free wires floating around. Apart
form that the two 4 pin connectors that run from the pcb under the front
panel to the right side of the pcb in the bottom of the case have come
off and im not sure which one connects where. if anyone has any idea of
which one goes where and where the transformer should be mounted and
what wires connect where to the fuse id be really appreciative if you
could let me know or if you have a wiring diagram forward it on or let
me know where i can look at it.
 
The other thing i noticed is the transformer seems to be wired into the
copper coils....is this normal? or has it maybe been modified?
 
Thanks
Brett
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20050412/ce168f50/attachment.htm>