[sdiy] Looking for alu stompbox manufacturer!

[Peter Cornell]

> PCB distances wich forces me to drill at least 4 holes on bottom wich
> becomes the top when finnished, then put in plastic or brass distances,
> All that is an extra work for me and "ugglifying" the finnished box.

Dont you just hate that........

I've ended up using self adhesive PCB pillars for my projects

http://1176neve.tripod.com/id19.html

They may be too big for stompboxes tho.

Regards
Peter



----- Original Message ----- 
From: "karl dalen" <dalenkarl at yahoo.se>
To: "Peter Cornell" <peterc at onwe.co.za>
Cc: <synth-diy at dropmix.xs4all.nl>
Sent: Monday, April 11, 2005 11:02 PM
Subject: Re: [sdiy] Looking for alu stompbox manufacturer!


> Im aware of Farnell and suppliers like they, the problem is that
> most diecast boxes they carry has either inmodled PCB card rails on the 
> sides
> wich is usless for me, or they dont have inmolded, incasted bottom
> PCB distances wich forces me to drill at least 4 holes on bottom wich
> becomes the top when finnished, then put in plastic or brass distances,
> All that is an extra work for me and "ugglifying" the finnished box.
>
> Regards
> KD
>
> --- Peter Cornell <peterc at onwe.co.za> wrote:
>> Go to www.farnell.com & do a search for "diecast'.
>>
>> This will bring up a number of aluminium boxes that will be suitable for
>> pedals. Farnell are in most of Europe too.
>>
>> Peter
>>
>>
>> ----- Original Message ----- 
>> From: "karl dalen" <dalenkarl at yahoo.se>
>> To: <synth-diy at dropmix.xs4all.nl>
>> Sent: Monday, April 11, 2005 4:40 PM
>> Subject: [sdiy] Looking for alu stompbox manufacturer!
>>
>>
>> > Looking for alu stompbox manufacturer = anywhere!
>> > Looking for alu stompbox supplier = europe, scandinavia!
>> >
>> > Reg
>> > KD
>>
>>
>