[sdiy] Looking for alu stompbox manufacturer!

[karl dalen]

Im aware of Farnell and suppliers like they, the problem is that
most diecast boxes they carry has either inmodled PCB card rails on the sides
wich is usless for me, or they dont have inmolded, incasted bottom 
PCB distances wich forces me to drill at least 4 holes on bottom wich 
becomes the top when finnished, then put in plastic or brass distances,
All that is an extra work for me and "ugglifying" the finnished box.

Regards
KD
 
--- Peter Cornell <peterc at onwe.co.za> wrote:
> Go to www.farnell.com & do a search for "diecast'.
> 
> This will bring up a number of aluminium boxes that will be suitable for 
> pedals. Farnell are in most of Europe too.
> 
> Peter
> 
> 
> ----- Original Message ----- 
> From: "karl dalen" <dalenkarl at yahoo.se>
> To: <synth-diy at dropmix.xs4all.nl>
> Sent: Monday, April 11, 2005 4:40 PM
> Subject: [sdiy] Looking for alu stompbox manufacturer!
> 
> 
> > Looking for alu stompbox manufacturer = anywhere!
> > Looking for alu stompbox supplier = europe, scandinavia!
> >
> > Reg
> > KD 
> 
>