[sdiy] favorite dual ganged potentiometer
harrybissell
harrybissell at prodigy.net
Tue Sep 28 06:16:07 CEST 2004
Wotch owt fro some of those dual audio pots... some have detents
which suck IMHO. Once upon a time they were meant toi simulate
the feel of stepped attenuators in high-end audio gear... but in my
experience they have only two real positions, too little and too much !!!
H^) harry (READ the fine print :^)
"J. Larry Hendry" wrote:
> If you are willing to go this carbon pot route, you can get these from
> Mouser. They have the Xicon / Alpha 24 mm carbon pots in dual gangs. Here
> is an example of a part number 31VW401 is a dual 10K linear. They have 1/4
> round shafts.
> Larry H
>
> ----- Original Message -----
> From: Peter Grenader <peter at buzzclick-music.com>
> To: Joseph Craig <blitz at nmt.edu>; <synth-diy at dropmix.xs4all.nl>
> Sent: Monday, September 27, 2004 6:02 PM
> Subject: Re: [sdiy] favorite dual ganged potentiometer
>
> All Electronics has tons of dual 100K and 50K audio Alphas. They are PCB
> mount however with a knurdled 6mm shaft.
>
> Futurlec also has these, for the same price as All.
>
> Joseph Craig wrote:
>
> > After trying to come up with a circuit to do stereo volume with one
> > pot, I realized it could only be done with a dual ganged pot.
> >
> > Which brand/model does everyone use?
> >
> > What is your recommendation? Audio signal of course, used for volume.
> >
> > thanks,
> > -Joe
> >
More information about the Synth-diy
mailing list