[sdiy] Diagnosing Fatman problem

[James Howe]

Paia is sending me two new IC's since they think there is a possibility  
that one or both may be bad.

On Wed, 22 Sep 2004 14:13:01 +0200, Gabriel Lindeborg <gali at tiscali.se>  
wrote:

> I had a similar problem when I built mine and the eprom was the cause...
> I reburnt it and then everything worked.
>
> //Gabbe of Sweden
>
> James Howe wrote:
>
>> I've just completed building a Paia Fatman synthesizer as my first DIY   
>> synth.  Unfortunately it's not completely working.  It powers on just   
>> fine, no overheating or smoking.  [...]
>>



-- 
James Howe