[sdiy] Which Coax for modular patch cables?

[Peter Grenader]

On a side note, All Electronics is currently  selling 2 foot long mono mini
cables for a buck each.  I've bought about 40 of them and they are fine.  If
for some reason down the line they start failing... I only paid a buck for
them!

Rob Keeble wrote:

Hi,
RG174, 2.8mm diameter, Farnell part number 585-592
 
http://uk.farnell.com/jsp/endecaSearch/partDetail.jsp?SKU=585592&N=401
<http://uk.farnell.com/jsp/endecaSearch/partDetail.jsp?SKU=585592&N=401>
 
Works well, and fits a range of small 3.5" jacks, including the Schurter
ones that Farnell sell.
 
Regards
Rob
www.emulatorarchive.com <http://www.emulatorarchive.com>
 
-----Original Message-----
From: owner-synth-diy at dropmix.xs4all.nl
[mailto:owner-synth-diy at dropmix.xs4all.nl]On Behalf Of doof
Sent: 18 September 2004 14:43
To: synth-diy at dropmix.xs4all.nl
Subject: [sdiy] Which Coax for modular patch cables?

Hello all,
 
I'm building up a modular system and I want to make my own patch cables.
The system is primarily of the mini-plug variety.  Can anyone give me a
recommendation on a good brand/model of coax to use for this purpose?
Primarily it needs to be thin and flexible.  Belden have something like
that?
 
Thanks!